How To Fix Hard Disk I/O Device Error On Windows

(Solved): How To Fix Hard Disk I/O Device Error On Windows

Well, I/O device error means Input/Output Device Error. The error occurs when the operating system fails to connect to the hardware device. Here we have shared a few best methods to fix the “The request could not be performed because of an I/O device error” from Windows 10 computer.

serverpoint hosting banner

Recently, we found lots of Windows 10 users complaining about a strange error. The strange error message “The request could not be performed because of an I/O device error” occurs while performing different tasks related to the hard drives, SD cards, SSD, USB Drives.

What makes the error worst is that it doesn’t allow users to read or write from a disk. That means you can’t copy and paste or move things around. So, in this article, we have decided to share you few best fixes to solve The request could not be performed because of an I/O device error.

What is an I/O device error?

Well, I/O device error means Input/Output Device Error. The error occurs when the operating system fails to connect to the hardware device. There might be several reasons behind the error, it might be due to the outdated drivers, lose connection of hardware, incompatibility issues, or hard drive damage.

If your hard disk is damaged, then these methods won’t work and you need to change or repair your hard disk drive. However, if the error is occurring because of other reasons, then it can be fixed in no-time. So, here we are going to share a few best methods to fix the “The request could not be performed because of an I/O device error” from Windows 10 computer.

#1 Restart Your Computer

Restart Your Computer
Restart Your Computer

As we all know, a simple restart can sometimes fix lots of software problems. So, if “the request could not be performed because of an I/O device” error is occurring because of software that you have installed then it can be fixed with a simple restart. So, its always better to restart your computer before making further changes. Therefore, make sure to restart your computer and then check whether the error persists.

#3 Check the Hardware Connections

Check the Hardware Connections
Check the Hardware Connections

Well, the “The request could not be performed because of an I/O device error” also occurs due to a loose connection between the hardware and computer. So, the next that you need to do is to check whether the hardware is properly connected or not. For example, if you are getting the error while transferring files to the USB Drive, then remove the USB drive and reinsert it. If the error was occurring because of loose connection, then it will be fixed straight away. Similarly, you need to check whether the hard drive is properly installed on your computer or not.

#3 Using SFC Command

Using SFC Command
Using SFC Command

SFC command scans and fixes system related files of your Windows computer. Not just that, but the SFC command is extremely helpful when it comes to fixing the corrupted windows file. So, we need to run the SFC command on CMD to fix the “The request could not be performed because of an I/O device error”. Here’s what you need to do.

  • Search CMD on the search bar
  • Right click on the Command Prompt and select ‘Run as Administrator’
  • Now on the CMD enter sfc/scannow
  • Wait until the scanning process completes.

#4 Using Chkdsk Command

Using Chkdsk Command
Using Chkdsk Command

CHKDSK is another useful command which you can use to fix The request could not be performed because of an I/O device error. CHKDSK verifies the file system integrity of a volume and fixes logical file system errors. Here’s how you can use chkdsk command to fix the I/O device error.

  • Search CMD on the search bar
  • Right click on the Command Prompt and select ‘Run as Administrator’
  • Now on the CMD enter Chkdsk /R /E: (Here’s E is the drive label which is creating the problem)
  • Wait until the command completes the scanning process

The ChkDsk command will identify any bad sector and will attempt the recovery options.

#5 Run the Default Error Checking Of Windows

Well, the Windows operating system provides us with lots of troubleshooting tips. One of those is to check hardware for the errors. In fact, running the Windows default tool to fix the I/O device error is one of the effective methods that you can try today. So, here’s how you can use the Windows default tool for Error checking.

Default Error Checking Of Windows - (Solved): How To Fix Hard Disk I/O Device Error On Windows
Default Error Checking Of Windows
  • Right click on the drive where you are getting the error and select Properties.
  • Next, locate to the Tool tab and then click on the ‘Check’ button
  • Now the tool will send you a confirmation message. Click on ‘Scan Drive’ to start the error checking process

That’s it, you are done! After completing the error checking process, the “The request could not be performed because of an I/O device error” will be fixed.

So, these are the 5 best methods to fix the “The request could not be performed because of an I/O device error” from your Windows computer. If you have any other doubts, then make sure to discuss with us in the comments.

 

You might also like More from author

Leave A Reply

Your email address will not be published.