10 Best CPU Temperature Monitor Tools For Windows
Well, if you want to keep your PC in good health, then you need to monitor the system resources. Since we now do lots of stuff with our Windows computers, monitoring system resources becomes an important thing. In fact, knowing the peaks of your computer’s capabilities and limitations can be a lifesaver in several situations.
So, if you want to utilize your computer at its full potential without damaging or overheating it, then you need to monitor CPU temperature as well. So, in this article, we are going to share a list of best CPU Temperature monitor software for Windows 7, Windows 8, and Windows 10.
It’s worth to note that there are plenty of CPU temperature monitoring tools available for Windows PC, but not all of them works. So, in this article, we have listed the tools which work and worth your attention. So, let’s check out the list of best CPU temperature Monitor tools for Windows.
CPU Temperature Monitor
Monitoring hardware metrics of your network devices is equally as important as monitoring any other performance metric of your network. This is primarily because variations in these hardware metrics will directly affect the performance of your devices. In an enterprise network, servers are the most performance-critical devices, and even slight fluctuations in their availability can make or break your network.
Knowing your key performance metrics
The primary performance metrics of a server can be grouped together into four broad categories:
- Processor: CPU-related stats like idle time, number of system calls per second, CPU interrupts per second, and processor time.
- Memory: Free physical memory available and number of reads/writes per second.
- Network: Packets received/transmitted and their rates, and total network usage.
- Disk: Disk utilization, read/write stats, and available and used disk space in MB/GB.
ManageEngine OpManager is a unified network monitoring tool for IT admins which displays all available temperature data, important hardware metrics such as fan speed, memory utilization, clock speed of the processor, and chassis-related info making it an all-in-one CPU temperature monitor software.
Well, CPU Thermometer is another best CPU monitoring tool on the list which works with AMD and Intel processors. The great thing about CPU Thermometer is that it shows the CPU cores and their temperature. Not only that, but CPU Thermometer also shows the CPU load capacity for each core as well. So, CPU Thermometer is definitely the best CPU monitoring tool that you can use right now.
Well, if you are searching for an easy to use and lightweight Windows 10 software to check the CPU temperature, then you need to give Core Temp a try. Guess what? The mini tools run in your system tray and continuously monitors the temperature of your CPU. It shows the real-time reports of the CPU temperature right on the system tray. So, Core Temp is another best CPU monitoring tool for Windows 10 that you can use right now.
HWMonitor is one of the best and advanced CPU monitoring tool available out there which shows the current temperature of the Motherboard, Graphics card, CPU, and Hard drive. Not only that but also displays the CPU loads in real-time as well. However, the tool is a little bit advanced, and the reports are quite complicated to understand. Still, HWMonitor is one of the best CPU monitoring tool for Windows 10 that you can use today.
SpeedFan is another most used CPU temperature tool for Windows 10 that shows a wide range of information about your system resources. For instance, the tool shows the fan speed, voltage, processor temperature, GPU temperature, etc. Apart from that, SpeedFan also got the ability to access the S.M.A.R.T information to check the hard disk temperature as well. So, SpeedFan is definitely the best Windows 10 CPU monitoring tool that you can use.
Well, if you are searching for a Windows 10 tool to discover what’s inside your PC, then you need to give Speccy a try. It’s basically a system management tool that also checks for software updates as well. Apart from that, the advanced section of Speccy also shows the real-time CPU temperature as well. The software works on both 32 bit and 64 bit computers and its one of the best CPU monitoring tool available out there.
HWiNFO is one of the best free professional system monitoring and diagnostic tool available out there. The software is known for its comprehensive hardware analysis, monitoring and reporting for Windows and DOS. HWiNFO shows everything, including your CPU information, GPU Information, current speed, voltage, temperature, etc. So, HWiNFO is another advanced system monitoring tool that you can use right now.
Game Assistant 2
Well, Game Assistant 2 is a software meant to promote better gaming experience. The software reports about the RAM usage, the current temperature of CPU, fan speed, etc. So, Game Assistant 2 shows all the information that’s needed to keep an eye on your system and monitor the level of exertion you are putting on your computer. So, Game Assistant 2 is another best free CPU monitoring tool for Windows 10 that you can consider.
AIDA64 is a premium software on the list which has lots of advanced features. Well, AIDA64 doesn’t analyze every part of your computer, nor it shows an extremely detailed report. However, it shows the most relevant details that were required for proper system monitoring. With AIDA64, you can quickly check the temperature of your PC’s motherboard, CPU, PCH, GPU, SSD, etc.
ASUS AI Suite
Well, if you are using an ASUS computer or laptop, then ASUS AI Suite might be the best pick for you. With ASUS AI Suite, you can easily check your CPU temperature in real-time. Basically, the ASUS AI Suite is meant to underclock and overclock the CPU. Apart from that, the ASUS AI Suite can also be used to optimize the CPU settings to provide the best performance.
So, these are the ten best CPU monitoring tools in 2019 that you can use right now. If you know any other such software, let us know in the comment box below.