How to Eliminate WiFi Deadspots with These Simple Steps
If you are using a smartphone while walking into a room and suddenly you found that the WiFi stopped working and the signal dropped to zero. Then that's the dead zone. So, in this article, we have shared some of the best methods that would help you to get rid of WiFi dead spots.
What are WiFi dead spots? So this is kind of thing that some of the users might have faced while connected to the WiFi network in their buildings or house etc. Wireless Dead Zone are nothing more than the area where the WiFi signal drops to zero. Well, if you get out of the Wireless network zone, it's pretty obvious to get the low signal, but that's not called Dead Zone. Wifi or Wireless dead zones are simply an area within your house or office that's supposed to be covered by WiFi, but it doesn't work there.
So, if you are using a smartphone while walking into a room and suddenly you found that the WiFi stopped working and the signal dropped to zero. Then that's the dead zone. Well, having a wireless dead zone is a common thing, especially if you live in densely populated areas. So, in this article, we have shared some of the best methods that would help you to get rid of WiFi dead spots. So, let's explore how to eliminate WiFi dead spots in 2019.
The method is quite simple and easy and you just need to follow the simple guide to Eliminate WiFi Dead spots. So follow the below guide to proceed.
#1 Find the Problem Areas
Well, before trying to eliminate the WiFi Deadspots, its important to know the problem areas. You actually don't need any software to identify the dead spots. Just pick up the smartphone, connect with the wireless network and walk around the house. You need to pay close attention to the WiFi signal indicator of your smartphone. If the WiFi signal strength drops to zero, then you have just discovered a dead zone.
Alternatively, you can use the WiFi Analyzer app on your Android smartphone to know the detailed information about the WiFi signal strength. WiFi Analyzer for Android also shows the frequency of other surrounding networks as well.
#2 Move The Router To The Central Location
Well, if your router is in one corner of your office or house, and the dead zone is exactly in the opposite corner, then you need to move the Router to the Central location. Always try to position the router in the central location of your house, apartment or office. Once done, check whether your device is still getting poor WiFi signal or not.
#2 Use The Least Congested Wireless Channel
Well, if you are living in a densely populated area, then wireless networks can impact speeds. Most of the new WiFi routers automatically switches to the least congested channel, but lots of cheap routers will just use the predefined channel, even if it isn't the right one. You can use Android apps like WiFi analyzer to identify the least congested wireless channel for your WiFi network. Once done, you can change the settings on your router to eliminate the dead spots.
#4 Check Router Position
Sometimes when the router sits between any electronic device then it tends to behave in such a way that the signal gets restricted from some portion of the area and hence along that way the users tend to get up either distracted signal strength or o signal at all. If you are also facing any dead spot then try to check out the positioning of your WiFi router and place it away from any electronic device.
#5 Update Hardware and Firmware
Changing up the Router or any WiFi related hardware that have been too old could be the great thing that you could actually do to get up the best performance for the network connection. You should tend to update the router as well as any wireless adaptor, this could be done through checking up the manufacturers of the hardware and then asking their help.
#6 Use Wifi Extender
You can use up the WiFi extenders that are the devices that could provide you to spread up the WiFi connection signal to more area by acting as a middle-man. These devices receive up to the signal, boost up their strength and then pass it to the same direction. Now if you find up any dead spot in between the limit area of your WiFi connection you could remove or varnish it through using up the Extenders!
#7 USB Adapter
Use up the external WiFi adapters for your computer if you are using up the internal built-in WiFi adaptors till now. The USB adaptors could be the great value for getting up the increased performance and signal strength as this external hardware are much more capable of capturing even the lowest bandwidth signals.
#8 Alter Router Antenna
If the Router you are using up have an extended Antenna which can be moved in either direction then try to set up the direction of the antenna in such a way by which you get up most signal strength throughout. The best position for the antenna could be standing erect in the vertical position as this also does not block it from the electrical waves inside the router or other devices.
And these were the things that you can do to solve out your Wifi related signal issues in the dead spots and you could also eliminate these dead spots from your house or the building. Facing up the dead spots could be a very rare chance but still it is not impossible to have this problem or the issue and if you have also found up any dead spot then don't just feel it to be the signal issue, just correct it by using up the method and ways described in the article!